199 Continuous-motion Case Sealers

Hot Glue or Tape Options Available

Glue Sealer Option

Continuous-motion Case Sealer

Hot Melt Glue option shown above. Tape sealing option also available.

Standard-Knapp's 199 Glue Sealer is a high-speed machine for sealing Primed Flap and Re-shipper (RSC) cases. Utilizing a one-hose, four-gun, hot melt glue system, the sealer glues and folds the top flaps into place.

High Efficiencies

Inline machine design allows for high speed, consistent sealing of all incoming cases whether close coupled to the discharge of a case packer or installed as a stand-alone machine.

  • On demand servo controlled flap tucker ensures precise timing and consistent glue pattern. Pneumatically controlled flap tucker is also available for slower speeds.
  • One hose, four(4) low-cavity glue guns ensure reliable gluing and virtually no-drip operation.
  • Designed with fewer moving parts to reduce downtime.
  • Continuous-motion, inline case handling permits high-speed sealing. 50-75 cpm is achievable with addition of optional speed kit (includes high-speed flap tucker and extended compression module).
  • Robust, proven compression section utilizes standard friction belt to easily handle lightweight cases and eliminates the need for side belts.
  • Dual side case sensors ensures accurate glue placement.

Simple Operation

  • User-friendly HMI touch-screen control panel
  • No guard doors - access to sealer is safeguarded by light curtains to allow for easy entry for changeover or maintenance
  • Hot melt unit mounts on either side of the sealer
  • Operations and maintenance manuals available on CD-ROM

Quick, Positive Changeover

  • One operator can complete changeover in less than 2 minutes
  • No tools or change parts needed
  • Infeed glue pattern is changed with the push of a button
  • To eliminate guesswork, each changeover point is numbered, and corresponding settings are documented on chart provided with machine

Low-maintenance Design

  • Rust-proof stainless steel frame
  • Continuous motion design reduces "impact" wear

199 Glue Sealer Specifications*

Model: 199 Glue Sealer
Speed: 50-75 cpm optional with addition of speed kit†
Case Specifications:Corrugated, RSC or Primed Flaps
Case Dimensions
(Min. - Max.):
Length: 7" – 24"
Width: 5.5" – 19"
Height: 5" – 18"
Voltage:230/460V, 60Hz, 3-Phase
Control Voltage:24 VDC
Hot Melt Unit: Nordson® ProBlue 7
Construction:Stainless Steel

Continuous-motion Case Sealer

* Standard-Knapp is committed to continuous product improvement. Specifications are subject to change without notice.
†Optional speed kit includes high-speed flap tucker and extended compression module.


Tape Sealer Option

Continuous-motion Case Tape Sealer

Taping head option shown above. Hot glue sealing option also available.

The Standard-Knapp 199 Case Tape Sealer is a continuous-motion inline machine that provides consistent tape sealing, whether integrated with the discharge of a case packer or installed as a stand-alone machine.

  • Pneumatic Flap Tucker ensures precise timing and consistent tape application for re-shipper cases (RSC). An optional servo-controlled "bowtie" flap tucker handles primed-flap cases.
  • Fewer moving parts means reduced downtime.
  • Continuous-motion, inline case handling permits consistent tape sealing. Speeds of 30-56 cpm are achievable for RSCs, and 30-70 cpm with the servo-controlled flap opener for stiff flaps.
  • Robust, proven compression section utilizes standard friction belt to easily handle lightweight cases and eliminates the need for side belts.
  • Sealed-flange bearings for long life and maintenance-free operation.

Robust Construction

Stainless steel tubular frame

High Reliability

Designed for 24/7 operation

Simple Operation

User-friendly push-button control panel

No Guard Doors

Light curtains prevent injury while allowing easy-access for changeover or maintenance

Quick, Positive Changeover

One operator can complete changeover in less than 2 minutes

Quality Fit and Finish

Proudly assembled in the U.S.A.

Walk-by Maintenance

Quick, easy system status assessment

Durable and Consistent Tape Head

The Model 199 Case Tape Sealer features the robust, stainless steel DEKKA 22 tape head. This tape head is both easy to adjust and simple to maintain.

Loading can be done in 30 seconds or less without removing the assembly. The exclusive "No Break" tape system advances the tape along its centerline, avoiding edge stress and helping to prevent tape breaks.

Optional "Bowtie" Flap Tucker for Primed Flap Cases

The bowtie rotates 180˚ to accurately fold the rear flap, following the case until the flap meets the flap guide. The bowtie is servo-controlled for reliable, configurable operation. Laminate construction ensures that the bowtie is durable and built to last. A pneumatic flap tucker design is used for speeds of 35 cpm or less.

199 Tape Sealer Specifications*

Model: 199 Tape Sealer
Speed: 30 - 56 cpm with Pneumatic flap tucker (RSCs)
30 - 70 cpm with Servo-Controlled Bowtie flap tucker (Primed-Flap Cases) **
Voltage:230/460V, 60Hz, 3 Phase
Air Supply:60psi with ½" NPT
Control Voltage:24 VDC
Interface:Push-button Control Panel
Case Specifications: Corrugated, RSC or Primed Flaps
Case Dimensions (min. – max.):Length: 7" – 24"
Width: 5.5" – 19"
Height: 5" – 18"
Taper Unit: DEKKA 22 Tape Head
Construction: Rust-Proof Stainless Steel
Footprint: 12' L × 5'6" W
Assembled in: Portland, CT U.S.A.
Manuals: Available on CD-ROM

Continuous-motion Case Sealer

* Standard-Knapp is com m itted to continuous product im provem ent. Specifications are subject to change based on product line conditions or customer requirements. All dim ensions are approxim ate.
** Servo-controlled bowtie flap tucker required for prim ed-flap cases.