939 Case Packer Standard Components

939  Case Packer

Standard-Knapp currently uses the following standard equipment on its model 939 Case Packer. ´╗┐Components are subject to change based on product line conditions or customer requirements.

PLC
CompactLogix model# 5370 L3 part# 1769-L30ERM
Operator Interface
Panelview Plus 6 1000 (machine mounted, boom option)
AC Drives
PowerFlex 40P with 22-COMM-E EtherNet/IP Adaptor and DriveGuard Safe-Off wired for Category 3, Stop Category 0, per EN 954-1
AC Motors
Baldor
Servo Drives
Kinetix 6500 EtherNet/IP with Safe-off Feature wired for SIL 3, Safety Category 3, Stop Category 1 per EN 954-1
Servo Motors
460V MPL with multi-turn encoder
Pneumatics
SMC EX600 Manifold EtherNet/IP rated IP67
Air dump filter/regulator
SMC solenoid operated dump/exhaust valve with integral lockout valve and integral pressure switch. Lockable in the safe position
Guard door switches
18mm dual channel Sensaguard RFID non-contact with 30mm actuator. Wired to a distribution block for easy maintenance
E-stops
Dual channel 800T with round yellow nameplate
Safety Relay
Guardmaster DI Dual Input wired for dual channel monitored manual reset, monitored output. Cat 3 per EN 954-1
Light Curtain (if required)
Point of Operation Control (POC) Type 4 Safe 4 light curtain wired for Cat 3 per EN 954-1
Main disconnect
AB 1494R class J fuses, thru the door, lockable in the off position
GracePort Interface
Type 4, with Ethernet RJ45 and duplex GFCI outside, single GFCI inside. Mounted on the outside of the main enclosure door
Sensors
AB or Efector with M12 QD connector